Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Venice
A full roof replacement in Venice typically runs $14,000 to $28,000 for a standard low-slope or flat built-up tear-off, with smaller bungalows and larger apartment courts pushing either side of that range. Most Venice jobs start with an inspection we do as a standalone service, not a sales call. If you’re at the point of needing a new roof, call (855) 382-1073 for a free estimate.

We know the streets between the canals and Abbot Kinney, the beach bungalows off Speedway, and the dingbat courts along Rose Avenue. Barnwood Roofing has rebuilt roofs in 90291 and 90294 for years, and we’ve learned what the salt air does to fasteners, flashing, and decking here. Local knowledge matters because a Venice roof fails differently than one in Culver City or Ladera Heights. The marine layer, the fog, the wind-driven sand: these aren’t abstractions to us. They’re what we plan for.
Ruben Calloway leads our crews, and his approach is simple. Inspection first, recommendation second. We’ll tell you if a repair is enough, and we mean that. We do repairs as a core service, so there’s no financial incentive nudging us toward a full replacement when one isn’t warranted. That’s the whole point of being a full-cycle roofer.
Why Barnwood Roofing Is Venice’s Preferred Roof Replacement Company
Venice homeowners tend to be wary of roofers. That’s fair. Replacement is a five-figure decision, and plenty of contractors push a full tear-off when a repair would buy five more years. Our reputation in Venice is built on the opposite approach. Ruben Calloway has led Barnwood Roofing from Fontana, and our Venice work skews heavily toward older homes where honest guidance matters more than a fast close. We inspect, we document what we find, and we walk through the numbers before you sign anything.
We respond quickly to Venice calls for the neighborhoods we serve, including the walk streets, the canal district, and the area around Penmar Recreation Center. Response time to 90291 and 90294 is typically same-week for inspections. Our Venice customers regularly mention that we showed up when we said we would, that the quote matched the final invoice, and that we were straightforward when they didn’t need a full replacement. That last one matters to us. When we tell someone their roof has another five years, we’ve earned a call for the next inspection.
You won’t find us pushing one brand. We install and service Roof Replacement systems from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. Seven brands, one honest recommendation. We match the product to the home’s performance needs and your budget, not to what’s in our warehouse.
Styles & brands we work with






Flat Roof Replacement in Venice
Flat Roof Replacement in Venice is different than it is almost anywhere else in Los Angeles. The housing stock here runs to low-slope and flat built-up roofs on 1905 – 1930s beach bungalows and the dense 1950s – 60s stucco apartment blocks just off the sand. These roofs were built for a marine environment, not rain. Drainage slopes and scuppers are chronically under-maintained because Venice only gets a handful of real storms a year. Then the first winter rain arrives and a clogged scupper backs water into the parapet, and that’s when we get the call.
A flat roof replacement in Venice typically runs $13,000 to $22,000 for a standard tear-off and new built-up or modified-bitumen system, depending on square footage and decking condition. That price often moves once the old membrane comes off. More on that below.
When old decking changes the scope
On a flat Venice roof, the membrane is usually failed by the time we’re called. That’s the visible problem. But pulling it off frequently exposes rotted skip sheathing and framing that was never sized for a full tear-off and re-deck. We inspect before we quote, and we write decking allowances into the contract so a surprise doesn’t become a change-order fight. Any additional work gets priced and approved in writing before we touch it.
Scuppers, parapets, and flashing
Rusted-through galvanized flashing at stucco roof-to-wall transitions is the signature Venice failure. Salt-laden onshore air eats fasteners and edge metal within a few blocks of the sand. When we replace a flat roof in Venice, we set new drip edge, replace corroded flashing at every parapet and wall transition, and verify the scupper sizing is adequate. A properly sized, clean scupper is worth more than any product upgrade on a flat Venice roof.
Roof Installation in Venice
Roof Installation in Venice lands differently than in the Valley or the Inland Empire. Lots here are tight, roof planes are small and complex, and original bungalows have been enlarged so many times that the framing tells a story. Installing a new roof correctly means working around that history, not fighting it. We install full systems, from underlayment through ridge vent, and we do it on roofs where the existing structure was built before modern anchoring standards existed.

A new roof installation on a Venice bungalow typically runs $12,000 to $19,000 for a standard architectural shingle system, while larger multi-story infill and stucco apartment courts run $20,000 to $35,000 or more depending on decking replacement and access complexity. Those ranges assume a full tear-off. A re-cover over one existing layer is possible in some cases and costs less, but we’ll tell you when that’s a bad bet in salt air.
Architectural shingles on older Venice framing
Architectural shingles from Owens Corning or CertainTeed hold up well in the marine layer, but they depend on a solid deck. Original 1x skip sheathing on a 1920s bungalow often won’t hold new fasteners into the old nail lines. We check the decking during inspection and price replacement sheathing where needed. It’s cheaper to know that before we start than to stop mid-job.
New construction and infill lots
Newer infill construction in Venice gives us a clean slate, and that’s where we lean on material warranties and proper ventilation design. But even on new construction, we’re thinking about the same marine environment: stainless or high-corrosion-resistance fasteners, edge metal that won’t rust through in a decade, and drainage slopes that work the first winter. The site is new; the wind off the sand is not.
Trusted Brands We Service in Venice
We source from seven manufacturers, and the Venice-specific decision usually comes down to wind uplift and corrosion resistance. Atlas and IKO both offer architectural shingle lines with high-wind ratings that make sense on the walk streets and near the beach, where Santa Ana gusts test everything. CertainTeed’s polymer-modified lines hold up well in damp, coastal conditions. We don’t stock a single brand’s inventory and work backward to make it fit. For Venice customers, we order to the job and can usually have materials staged within a week. If you want an apples-to-apples comparison between two product tiers, we’ll put it in writing. The right material for your roof, not just what we stock.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Venice Homes
- Rotted skip sheathing under old membranes. On 1905 – 1930s bungalows, pulling the old roof often exposes 1x skip sheathing that’s too degraded to re-nail. If a quote assumed re-cover, it moves fast once the tear-off reveals the real framing condition.
- Rusted-through flashing at stucco roof-to-wall transitions. A few blocks from the sand, galvanized flashing doesn’t last. Salt air corrodes it, and the first winter storm after the dry season drives water straight into the wall. This is the real unknown in most Venice bids.
- Clogged or undersized scuppers on flat built-up roofs. Low-slope apartment courts off Rose and Lincoln rely on drainage that hasn’t been maintained in years. Water backs up, sits against the parapet, and the membrane fails at the seam.
- Wind-driven sand degrading roofing membranes. It’s not rain that wears out a Venice roof. It’s the persistent fog keeping everything damp, plus sand abrading the membrane surface and salt eating the fasteners. We see roofs that look fine from the street but fail a close inspection.
Pricing for Roof Replacement in Venice, CA
Here are honest numbers for Roof Replacement in Venice. A standard flat roof tear-off and replacement runs $13,000 to $22,000. A pitched bungalow roof with architectural shingles runs $12,000 to $19,000, assuming the decking survives. Larger stucco apartment courts and multi-story structures run $20,000 to $35,000 or more. What moves the number, in order: decking and framing condition after tear-off, flashing and edge metal replacement, roof access and staging constraints on tight lots, and the shingle or membrane system you choose. Call (855) 382-1073 and we’ll schedule a free estimate with a written, line-item quote. The price we give you is the price you pay unless you approve a change in writing first.
We Also Serve Cities Near Venice
Barnwood Roofing covers the Venice area and surrounding communities. Our crews work regularly in Santa Monica, Culver City, Ladera Heights, and Century City, handling the same coastal and near-coastal roof conditions. If you’re just outside Venice, call us and we’ll schedule an inspection. The same honest approach applies wherever the job is.
Serving Venice, CA — Our Local Coverage Area
We’re based in the Venice area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Venice
Because the decking under the old roof is older than most contractors assume. On 1920s bungalows in 90291, original 1x skip sheathing is often too degraded to hold new fasteners, and the quote moves once we can see the framing. We handle this with a written decking allowance in the contract, not a surprise change order. If the sheathing is sound, you don’t pay for it. If it’s not, you approve the number before we continue. Call (855) 382-1073 and we’ll talk through how we price your specific roof.
Yes, and it happens faster than most homeowners expect. Salt-laden onshore air corrodes galvanized flashing and fasteners within a few blocks of the sand. A roof that would last 25 years in Culver City might fail at the edges and transitions in 15 years in Venice. That’s why we use corrosion-resistant fasteners and upgraded flashing on every Venice job. It’s not upsell; it’s the only way to make the roof stay put.
Yes. The City of Los Angeles Department of Building and Safety requires a permit for a full roof replacement, including tear-off and re-cover beyond one layer. We pull the permit, coordinate inspections, and close everything out. If you’re comparing bids, ask each contractor whether the permit is included in the quoted price. Ours is.
Compare the line items, not just the total. Look for whether the bid includes decking replacement allowance, flashing and edge metal, permit fees, and haul-away. A lower number that assumes re-cover over old decking will move once the tear-off starts. We write our Venice bids so the allowances are visible up front. That’s the honest way to compare.
Most 1950s – 60s Venice dingbat apartment courts have flat or very low-slope roofs that need a built-up or modified-bitumen system. We often recommend a multi-ply modified-bitumen with a reflective cap sheet, which handles the marine layer better than single-ply in this environment. The drainage is the bigger issue: we’ll check scupper sizing and clear blockages as part of the replacement. Call us at (855) 382-1073 and we’ll do a full inspection and talk through the best option for your building.
Written by Ruben Calloway, Owner at Barnwood Roofing, serving Venice and greater Los Angeles.